Quality Made in China

Product areas

Electronics assembly

We manufacture complete products with electronics, mechanics and software. Every product is fully tested and packed ready for delivery directly to your end customers.

  • PCBs, mechanics and final assembly from one supplier
  • Firmware upload and testing of every product
  • Packed with accessories, ready for the end customer

Read about manufacturing in China and why not go directly to the factory →

Assembly of Ctrl-Bar. NewTracks moulds the plastic housing and assembles the PCBs
Assembly of Ctrl-Bar. NewTracks moulds the plastic housing and assembles the PCBs
NewTracks staff member assembling Ctrl-Bar
Assembly of Ctrl-Bar. NewTracks manufactures buttons and rotary switches that are assembled into the finished product
Close-up of hands uploading software and inspecting the PCB in a Ctrl-Bar
Software upload and inspection
Finished Ctrl-Bar 2 being placed in its packaging
Ctrl-Bar packed for shipping directly to the end customer
NewTracks staff assembling Occulights along the line
Assembly of products for Occulights
Occulights Hub connected to a test setup for final inspection
Final inspection of Occulights Hub
NewTracks staff member loading firmware and testing an Occulights LED indicator
Firmware loading and testing of Occulights LED indicator
Occulights being packed in a cardboard box
Occulights packed ready for shipping to the end customer
Assembly of ONIBI Base with motor, sensors and electronics
Assembly of ONIBI Base with motor, sensors and electronics
Fully assembled ONIBI Base
ONIBI Base fully assembled, with software and calibrated, ready for the end customer
ONIBI Base from BeeFutures in operation, with bees at the entrance
ONIBI Base in operation

Mechanical assemblies

We deliver complete units and sub-assemblies, assembled and tested to the requirements we agree with you. Parts from different processes and factories are combined into one delivery.

  • Machined, cast, extruded and formed parts
  • Assembly of locks, screws and gaskets
  • Testing to agreed requirements before delivery
Assembly of Topro Step roller module
Assembly of Topro Step roller module
NewTracks staff member fitting the handle on Topro Step
Assembly of Topro Step handle
NewTracks staff member checking the position of the roller bearings with a limit gauge
Checking correct position of roller bearings with a limit gauge
The hinge is checked and adjusted with a torque wrench in a jig
Checking and adjusting the hinge for correct friction
Man walking down the stairs with Topro Step
Topro Step in use
Gloved hands assembling Learo door handles
Assembly of Learo door handles
NewTracks staff member assembling Learo door handles
Assembly of Learo door handles
Learo door handle being placed in a box
Learo door handles packed in boxes, ready to ship straight to end customers
Rows of machined parts with spring-loaded locks on foam
Assembled parts with spring-loaded lock
Machined aluminium frame with screwed-on steel plate and yellow protective plug
Machined aluminium frame with fitted steel plate and locking mechanism
Mechanical assembly with lens and polished ring held in white gloves
Assembled unit with lens and polished ring

Kiosks

We design and manufacture complete kiosks with screens, from enclosure and mechanics to assembly and testing. The kiosks we have delivered stand in hotels and airports across Europe.

  • Steel or aluminium enclosure
  • Screen, electronics and cabling integrated
  • Assembled and tested, ready for installation
Self-service taxi booking kiosks with touchscreens
Self-service taxi booking kiosks with touchscreens
FlyTag machine on board the Airport Express Train
FlyTag fully installed. Travellers can print bag tags on board the Airport Express Train
Tagomat machine where a traveller scans the boarding pass on a phone
Tagomat for self-service baggage check-in
Row of Tagomat kiosks in an airport departure hall
Tagomat kiosks for printing bag tags. Installed at Copenhagen Airport
Screen for self-service bag drop at a conveyor belt
Screen for self-service bag drop. Installed at Budapest Airport
Julius Espedal at a Fast Bag Drop self-service bag drop at Frankfurt Airport
The enclosures for Fast Bag Drop at Frankfurt Airport – supplied by NewTracks

Electronics enclosures

We make enclosures in steel or aluminium sheet metal. Laser cutting and bending are flexible with no tooling investment, while dedicated tools give very efficient production at high volumes.

  • Machining with no tooling costs
  • Sheet metal with laser cutting and bending
Ventilated aluminium electronics enclosure with machined base plate
Ventilated aluminium electronics enclosure with machined base plate
Black audio controller enclosure with walnut side panels and steel handles
Audio controller enclosure with walnut side panels
Audio controller enclosure packed in a box with foam insert
The enclosure packed in a box with foam insert, ready for shipping
1U rack enclosure in powder-coated steel with card holders and card fronts
1U enclosure for 19” rack. Powder-coated finish, die-cast zinc card holders and card fronts
Steel front panel and base plate for mounting a touchscreen
Front panel for mounting a touchscreen
Two brushed aluminium enclosures with cut-outs for screen, buttons and modules, and machined aluminium side panels
Brushed aluminium enclosures with cut-outs for screen, buttons and modules. Machined aluminium side panels
Machined aluminium enclosures, anodised grey and brown, with screen printing
Machined aluminium enclosures, anodised grey and brown, with screen printing
Row of painted steel enclosures with screen printing for mounting switches
Enclosures for mounting switches. Painted steel with screen printing
Black extruded aluminium enclosure with machined end plate
Extruded aluminium enclosure with machined end plates

Extruded aluminium

Extrusion means low tooling costs and a fast start. We deliver profiles cut, machined and surface treated, and can fit locks, screws and gaskets so you receive finished components.

  • Tooling in 4 weeks
  • Profile production in 4 weeks
  • Standard alloy AL6063 T5
  • Anodising, powder coating or electrically conductive Surtec 650
Extruded aluminium profiles machined from five sides. Conductive finish: Surtec 650
Extruded aluminium profiles machined from five sides. Conductive finish: Surtec 650
Three black anodised aluminium profiles with screen printing and fitted lock
Extruded profiles, machined, sandblasted, black anodised, screen printed and fitted with a lock
Extruded aluminium profiles, machined and clear anodised, fanned out
Extruded profile, cut, machined, sandblasted and clear anodised
Frame of bent and welded extruded aluminium tubes, sandblasted and anodised
Extruded tubes, bent, welded, sandblasted and anodised

Die-cast aluminium

Die casting gives precise parts with fine surfaces and relatively low tooling costs. The method suits products with requirements for precision, strength, thermal conductivity, EMC shielding and low cost.

Molten aluminium is pressed under high pressure into a steel tool, and the part is ejected once the metal has solidified. The process is automated and gives high capacity, consistent quality, tight tolerances and fine surfaces. Threads and surfaces with tight tolerance requirements are machined after casting. We offer sandblasting, painting, powder coating, polishing and chrome plating, and Surtec 650 for parts that need to be electrically conductive. To make the tool we need a 3D model in STEP format and a detailed 2D drawing.

  • Tooling in 4–6 weeks
  • Series production in about 4 weeks after an approved sample
  • Alloy ADC12 (A383) as standard
Video: aluminium die casting
Video: aluminium die casting (YouTube)
Die-cast aluminium bracket with grey powder coating
Die-cast aluminium bracket with grey powder coating
Die-cast aluminium PCB cover
Die-cast aluminium PCB cover. Powder-coated outside and conductive surface treatment inside
Die-cast components for Learo door handles laid out in rows
Cast components for Learo door handles
Three fully assembled LEARO door handles, painted black, grey and white
Fully assembled LEARO door handle, painted in three colours

CNC machining

CNC machining gives high precision and short lead times, with no investment in tooling. We machine aluminium, stainless steel, copper, brass and POM, and deliver the parts with surface treatment completed.

  • No tooling investment
  • Short lead times
  • Can be combined with extruded, cast or laser-cut parts
CNC-machined aluminium housing with four chambers
CNC-machined aluminium housing with four chambers
Black machined POM plate with threaded inserts
Machined POM with threaded inserts
Round aluminium plate with milled pockets
CNC-machined aluminium
Machined acid-proof stainless steel bracket with drilled holes
CNC-machined acid-proof stainless steel
Screen frame and stand in machined aluminium
Screen frame in machined aluminium
Stand made of machined elements in grey anodised aluminium
Machined aluminium elements, grey anodised. Delivered fully assembled
Machined 5 mm aluminium plates, bent, welded and grey anodised
Machined 5 mm aluminium plates, bent, welded and anodised grey
Small machined components in white plastic
Machined plastic components

Electromechanics and power elements

Mechanical parts in electronics and on PCBs need the right material and finish for low resistance, good corrosion protection and reliable soldering. We supply pogo pins, connectors, power elements and turned and stamped parts, almost always made to the customer's specification.

  • For SMD and through-hole mounting
  • Supplied on reels for automated assembly
  • Material certificate and inspection report on request
Custom-designed pogo pins with gold-plated surface
Custom-designed pogo pins with gold-plated surface
Pogo pins in black plastic housings with magnetic coupling
Pogo pins in plastic housings with magnetic coupling
Selection of aluminium and brass power elements for PCBs
Power elements for PCBs
Pogo pins and threaded standoffs supplied on reels for automated SMD assembly
Pogo pins and threaded standoffs supplied on reels for SMD
Pin header with gold-plated pins next to an SMD reel
Pin header supplied on reels for SMD assembly
Power element with threaded hole and Kapton tape for SMD assembly
Power element for SMD assembly

Heat sinks

We manufacture aluminium heat sinks for electronics and LED, with fins or pins matched to the heat that needs to be dissipated. They are made by cold forging or extrusion of aluminium.

  • Fins, pins or liquid cooling
  • Round and straight heat sinks
  • Machined and ready for assembly
Heat sinks in extruded aluminium, black anodised
Heat sinks in extruded aluminium, black anodised
Round aluminium heat sink with radial fins
Round aluminium heat sink with radial fins
Aluminium heat sink with many round pins
Pin heat sink
Hand holding a round aluminium heat sink with dense pins
Round aluminium pin heat sink
Hand holding a heat sink with dense, thin fins
Heat sink with dense, thin fins
Aluminium cooling plates with pressed-in copper tubes and thermal paste
Aluminium cooling plates with pressed-in copper tubes for liquid cooling

Stainless steel etching

Etching suits products with small details and high accuracy requirements, such as filters and electromechanics. Normal tolerance is ±0.03 mm.

  • Tolerance ±0.03 mm
  • Stainless steel AISI 304 and 316
  • Thickness normally 0.1–0.2 mm
Etched filter disc in thin stainless steel with hexagonal hole pattern
Etched filter disc in thin stainless steel with hexagonal hole pattern
Staff member measuring an etched part in an optical measuring machine
Optical inspection measurement
Etched filter discs packed in a round container
Packed in containers
Etched steel filter formed into a cone
Etched filter formed after etching
Etched steel strip with hole pattern and etched date
Hole pattern and etched text
Many small etched logo plates in acid-proof stainless steel on a black tray
Logo plates in acid-proof stainless steel, etched in large series
Boat nameplate in acid-proof stainless steel with etched text and symbols
Boat nameplate in acid-proof stainless steel, with etched text and symbols
Row of etched logo plates in acid-proof stainless steel
Etched logo plates in acid-proof stainless steel

Vacuum forming

Vacuum forming has very low tooling costs and suits everything from simple blisters to advanced components. After forming, edges and holes are punched or machined.

  • Very low tooling costs
  • From blisters to advanced components
  • Edges and holes punched or machined
Vacuum-formed HDPE rust protection for Tesla. Delivered as complete kits in custom packaging
Vacuum-formed HDPE rust protection for Tesla. Delivered as complete kits in custom packaging
Julius Espedal holding up a large vacuum-formed part at the factory
Founder Julius Espedal at the factory at the start of production of the Tesla kits
Black vacuum-formed assembly jig for battery production
Assembly jig for battery production
Stack of vacuum-formed assembly jigs for battery production
Assembly jigs for battery production, ready for delivery
White vacuum-formed front covers for Tagomat stacked on a pallet
Front cover for Tagomat, made in ABS
Inside of a vacuum-formed front cover with fitted steel plates
Fitted steel plates for reinforcing hinges and lock

Packaging

Packaging must protect the product in transit and give a good experience when the customer unpacks it. We design and produce packaging tailored to the product, from foam inserts to exclusive gift boxes.

  • Design tailored to product and accessories
  • Transport protection with foam inserts
  • Packed by us, ready for the end customer
  • Use of recyclable materials
  • Packaging designed to be used both for components shipped to Norway and onward to end customers
Phone charger for Goldfish Boat
Phone charger for Goldfish Boat
Transport box with foam insert for screen and enclosure parts for a kiosk
The same packaging is used twice – for safe transport of mechanics kits from China to Norway, and onward for the complete product to the end customer
White gift box with titanium dead man's switch and coiled cord on a raised foam insert
Titanium dead man's switch, delivered in exclusive packaging that gives an even better impression of the quality product
Black gift box with foam insert for product, cable and accessories
Packaging for Ctrl-Bar for Tesla. High-end packaging that gives a great first impression of the product
Blue cast parts held in place by cardboard inserts
Wall brackets for Topro Step. Cardboard inserts hold the cast parts in place during transport
Cardboard box with Topro Step logo for two die-cast aluminium wall brackets
Wall brackets packed in kits make logistics easier
Black product box with green print and logo
Printed product box to the customer's design
Brown cardboard boxes with black foam inserts for product and accessories
Brown cardboard boxes with foam inserts for product and accessories
Long brown cardboard box with foam holders that lock the product in place
Box with foam holders. After the electronics are fitted in Norway, the same packaging is used onward to the end customer
1U rack enclosure packed as a kit in a box with foam holders
1U enclosure for 19″ rack. The electronics are fitted in Norway, and the same packaging is used onward to the end customer
Product held in place by folded cardboard inserts
Solid packaging using only cardboard. Designed for fast packing and easy unpacking and recycling
Stacked printed boxes for Tagomat from BBC
Packaging designed for Tagomat
Discuss your projectOur brochure